works with InfiIoT · certified partner
Micro PLCs & logic controllers
DIN-rail PLCs that keep control local while publishing operating data to the platform.
32-bit
RISC processor
IEC 61131-3
ladder standard
µs
deterministic scan
[ Detail / port view ]
[ Installed on-site ]
Overview
These slim DIN-rail PLCs use 32-bit RISC processors, transistor or relay outputs, high-speed inputs, and an IEC 61131-3 ladder environment. InfiIoT certification lets setpoints, states, and counters flow into the asset twin while the control loop remains local and independent of network availability.
Specifications
representative · class-levelProcessor32-bit RISC
ProgrammingIEC 61131-3 ladder + PID/timer wizards
OutputsTransistor or relay
InputsHigh-speed counter inputs
CommsRS232, RS485, optional Ethernet
FormSlim DIN-rail
Deployment scenarios
Where this class earns its place.
For the OEM machine builder
Ship with the platform interface defined
A certified micro PLC lets each delivered machine expose known tags to the customer's InfiIoT tenant during commissioning.
For the production manager
Feed OEE from controller states
Cycle counts and machine states move from ladder registers into OEE calculations without end-of-shift transcription.
For the controls engineer
Keep the loop independent of the cloud
The PLC runs the process locally. A network fault affects visibility, not the control sequence.
Works with InfiIoT
The protocol, variable mapping, and platform handshake have already been tested.
DIN-rail slim form32-bit RISCIEC 61131-3high-speed I/ORS232 / RS485